Home - Return to Previous Page
SPC Alignment Cams Front Lower - Toyota TUNDRA 2000 - 2004
25445
25445 - TOYOTA TUNDRA CAM KIT (PAIR)
Fits:
- 2000 - 2004 Toyota Tundra
This Cam Bolt Kit is a replacement kit for the OE adjusters. The OE bolts on Toyota trucks and SUV's are frequently "frozen" and do not allow for adjustment. Remove the frozen bolt assembly and replace it with an SPC cam kit to get up to ± 1.50° camber and caster change. OE adjuster assemblies that are severely corroded may require SPC's press tool 40915 for removal, making the job quick and easy.
Front Adjustment range: Cam./Cas. ± 1.50°
Installation time: .3 hr/side
Required: 1 per wheel
Fits:
- 2000 - 2004 Toyota Tundra
This Cam Bolt Kit is a replacement kit for the OE adjusters. The OE bolts on Toyota trucks and SUV's are frequently "frozen" and do not allow for adjustment. Remove the frozen bolt assembly and replace it with an SPC cam kit to get up to ± 1.50° camber and caster change. OE adjuster assemblies that are severely corroded may require SPC's press tool 40915 for removal, making the job quick and easy.
Front Adjustment range: Cam./Cas. ± 1.50°
Installation time: .3 hr/side
Required: 1 per wheel
Description
25445 - TOYOTA TUNDRA CAM KIT (2)
---------------------------------------------------------------------------
This Cam Bolt Kit is a replacement kit for the OE adjusters. The OE bolts on Toyota trucks and SUV's are frequently "frozen" and do not allow for adjustment. Remove the frozen bolt assembly and replace it with an SPC cam kit to get up to ± 1.50° camber and caster change. OE adjuster assemblies that are severely corroded may require SPC's press tool 40915 for removal, making the job quick and easy.
Front Adjustment range: Cam./Cas. ± 1.50°
Installation time: .3 hr/side
Required: 1 per wheel
---------------------------------------------------------------------------
This Cam Bolt Kit is a replacement kit for the OE adjusters. The OE bolts on Toyota trucks and SUV's are frequently "frozen" and do not allow for adjustment. Remove the frozen bolt assembly and replace it with an SPC cam kit to get up to ± 1.50° camber and caster change. OE adjuster assemblies that are severely corroded may require SPC's press tool 40915 for removal, making the job quick and easy.
Front Adjustment range: Cam./Cas. ± 1.50°
Installation time: .3 hr/side
Required: 1 per wheel