Artec JK DIY Steel Steering Kit For 07-18 Wrangler JK

• 1.5 inch thick .250 inch thick wall DOM Steel Tubing
• Machined wrench flats on the tube adapters for easy tightening and a smooth look
• Able to be flipped to above knuckle or under
• Compatible with Right Hand Driver (RHD) vehicles
• Features Heat Treated Chromoly Offset rod ends to clear differential cover and other vehicle components
• Uses Massive 3/4 inch Grade 8 bolts for fastening to knuckles
• Includes 3/4 inch stover locking nuts for worry and maintenance free fastening
• All rod ends uses high misalignment spacers for increased rod end longevity and improved articulation
• Drilling Of Knuckles TO 3/4 inch Required
• Cutting Tubing To Length And Welding Tube Adapters Required

Includes:

• 2 RH and 1 LH - Offset XM 7/8 inch x 7/8 inch bore rod end for tie rod and drag link at the knuckle
• 1 LH - JMX 7/8 inch x 7/8 inch bore rod end for drag link at the pitman arm
• 2 RH and 2 LH - 7/8 inch x 14 tpi Jam Nuts
• 8 - 7/8 inch x 3/4 inch bore high misalignment spacers
• 4 - Grade 8 3/4 inch fine thread bolts
• 4 - 3/4 inch fine thread Stover locking nuts
• 1 - 1.5 inch OD .250 inch wall DOM Tubing 48 inch long for drag link
• 1 - 1.5 inch OD .250 inch wall DOM Tubing 54 inch long for tie rod

Note: Not for use with Stock or AEV wheels. Must be used with 17 inch wheel with 4.75 inch backspacing or less.