Artec ZJ 8.8 Swap Kit W/Truss 93-98 Jeep Grand Cherokee

SKU: TR8802

Pricing: $569.99

Description

Details:

Sold As Each
Features include:
1/4 inch thick mild steel truss and brackets For much higher strength than the factory bracket and other aftermarket brackets.
Precision CNC cut and bent For great fitment.
Includes all the brackets necessary For a complete axle swap including upper and lower control arm mounts, shock mounts, anti-sway bar mounts, tracbar mount, and coil spring mounts.
Save hours of installation time. Brackets are jigged into truss and set exact position automatically.
All other brackets just need to line up to truss, no guessing and measuring involved.
Tracbar mount includes both factory location and lifted bracket location For those who have aftermarket lifts.
Easily upgradeable For future link geometry changes. Just trim off factory location upper link mounts and weld on new centered link mounts.
Truss is reinforced using interlocked 1/4 thick gussets For maximum strength and easy assembly.
Overall low profile design means your axle is stronger, sleaker, easier to fit into any vehicle, and less likely to interfere with vehicle components.
This Kit requires general welding and fabrication skills.
Welding should only be done by a competent welder.
Artec Industries implies no guarantees or warranties and is not liable For improper installation.
Some grinding and fitment may be required when installing this Kit depending on your lift and other factors.
Every axle varies slightly and some fabrication may be required.
Will require brake line relocation to fit.